How to replace the battery for fingerprint door lock

Aug 17, 2020

Leave a message

new video smart lock

Fingerprint lock is very convenient. We can go out without a key, and the door will open automatically when we put it on. The electronic lock key I use uses dry battery. After using it for a year and a half, the power is insufficient. How to replace it, please see the following specific steps

Method / step:

1. Just press the handle on the door lock and a voice prompt appears. Your battery is insufficient. Please replace the battery immediately. At this time, it will be replaced

2. There is a panel inside the door lock. Screw down the panel with a screwdriver

3. Take out the four No. 5 batteries inside, and see the direction of the batteries inside

4. Let's put four new batteries in and put them in the same direction

5. Install the upper panel and tighten it with a screw driver. At this time, we will hear the sound of power on

6. Open the door and press the handle on the fingerprint position. At this time, the electronic door lock can be used normally. Usually, the battery life of the electronic door lock is about one year.




 

Send Inquiry
you dream it, we design it
We can create the IRON DOOR
of your dreams
contact us