There are many ways to install iron doors
Large or outdoor ones need to be embedded with fixed parts, and then electric welding.
If the indoor iron works are small, some of them can be fixed directly, and it is good to turn the screws in. Walls on both sides are fixed to the wall.
Note: 1. The foundation should be firm
2. Door column shall be firmly installed
3. The door body shall be fabricated and installed in accordance with the drawing design. It is basically welded with large column hinges with bearings
There are many methods for iron installation. Large or outdoor ones need to embed fixed parts and then conduct electric welding. If the indoor iron works are small, some of them can be fixed directly, and it is good to turn the screws in. Walls on both sides are fixed to the wall. Iron art can be divided into cast iron and forged cast iron. The surface of the forged cast iron is relatively rough with the mold, which will not be mentioned here. The forged cast iron art is made of special iron materials. The iron gate depends on the size of your door. Generally, 40 * 60 * 2 forged and embossed square pipes are used, 16 * 16 forged and embossed square steel is used in the middle, 14 * 6 embossed flat iron or thicker flat iron is used for bending, and 6-8 large round steel can be used for some patterned pieces.
As for the flower bending equipment, it can only play an auxiliary role. The flower bending needs a master
